Fabrication

These universal mounting weld-on tabs from PRP Seats are 3/16″ thick and are directly welded on to your roll cage or steel seat base. They provide a solid mount for your PRP Seats using 7/16” hardware.

These tabs are sold individually.

This is a light bar mounting flat tab from Outdoor Logic features a 5/16” mounting hole, has as 3” standoff length and is 1/8” thick. The tab comes raw so you can weld it onto your cage or bend it to bolt it into a light pocket for an aftermarket cage.

This laser cut flat tab is used by Outdoor Logic on their Defender series roll cage to mount dual whips to the cage. The tab has a low enough profile that it’s mounted inside the UTV’s compartment to have the whip flag mount through the roof cleanly instead of having it be an exposed whip flag mount. This tab helps create the clean lines of the Defender series roll cages.

This laser cut Outdoor Logic flat tab is a universal weld-on tab that features an offset hole. The offset offers a wider base for more surface area for welding but has the hole favoring one side for applications were clearance is important. It can be used for any number of applications in additional to being used as a light bar tab mount.

These Outdoor Logic steel plates are designed to be used with RotorpaX’s pack mounts, which are the universal mounts for their line of fuel and water utility stacking jugs. The steel plates are laser cut from 1/8” thick steel and feature two 3/8” holes positioned to mount the pack mount directly to it.

This laser cut Outdoor Logic formed tab is a universal weld-on tab that can be used for any number of applications in additional to being used a whip flag mounting tab. The tab’s hole diameter is an ideal size for most aftermarket whip mounts. It’s strong enough thanks to its thickness and shaped gussets to handle the high stress caused by the whip being tossed around on harsh trails and tree branches.

This laser cut Outdoor Logic mount is for mounting remote shock reservoirs. It features a stop to firmly hold the reservoir in place. Simply weld the mount in place and use a hose clamp to hold the reservoir in place.

A great way to strength a corner is to add a reinforcement gusset tab that welds into place. Outdoor Logic’s corner gusset tab is small enough to be fit in most locations, but strong enough to strength the corner it’s welded into.

These blank laser cut spare tire mounts from Outdoor Logic feature a 4x156mm bolt pattern ready for either 3/8” or 12mm wheel studs. These blank 1/8” thick steel plates give you a ready to use plate for you to fabricate your own spare tire mount.

This laser cut Outdoor Logic channel tab is a mounting bracket for the shoulder straps of the Polaris Click 6 harness seat belt. This channel tab is necessary when using an aftermarket roll cage because the Polaris Click 6 Harness shoulder straps bolts-on instead of wrapping the straps around the harness bar.

Two are required for each harness. Sold Individually.

This steel Outdoor Logic roll cage tube clamp utilizes two bolts that hold the assembly together when it's clamped over a roll bar or chassis tube. This clamp allows for convenient installation of many steel accessories that need a mount. Ideal for any fabrication welding task that calls for a removable clamp. 

This roll cage bung is designed to be used on the B-Pillar and C-Piller mount of the Polaris RZR XP 1000, and XP Turbo UTV’s. It's also used as the C-Pillar and D-Pillar on the Polaris XP4 1000 and XP4 Turbo.

This roll cage bung is designed to be used on all of the pillar mounts of the Polaris RZR 800, RZR 4 800 and RZR S 800 UTV’s.

These steel Outdoor Logic roll cage tube clamps utilize four Allen head bolts that hold the assembly together when it's clamped over a roll bar or chassis tube. This clamp allows for convenient installation of cage tubes and other accessories such as creating a specialized mount. Ideal for any fabrication welding task that calls for a removable clamp.