The aggressive red and black graphics are what you first notice about this Polaris RZRXP4 1000, but wait until you get up close.  This luxury prerunner has all the comforts you need for the long days on the trails.  

We covered the exterior by starting with DG Offroad’s sleek radius roll cage which is equipped with the rear bumper and spare tire moutn, and a Outdoor Logic front bumper. For a little extra detail, we added the laser-cut Outdoor Logic rear suspension plate. Bolted on top of the sheet metal skin, the custom fit roof rack is perfect for additional storage opportunities. Then upfront, to keep a clear view on things, an aluminum framed automotive glass windshield was added.

Now for that soft supple lining we’ve been waiting for, padded suede doors? Absolutely... The custom padded suede pieces are applied directly to the DG Offroad full door skins that protect the interior and its passengers. A great look along with sound deadening properties, and of course a little extra protection for those push the limit, knee banging rides.

Once you step in, you’ll see the suede continues into the interior. We provided some ride comfort and passenger safety with these PRP SEATS GT S.E. Suspension Front Seats and Rear Bench Seat. To keep the adults seated securely, we chose the PRP Seats 5.3 Harnesses with quick adjusters. For the little tykes, we custom fabricated the rear seat with a special center spot to ensure a snug fit every time.

We equipped this ride with an assortment of Axia Alloys accessories. Their 9” Wide Bolt On Panoramic Rearview Mirror and 5” Round Glass Billet Side Mirrors both offer a low distortion crystal clear view with its shatter resistant glass insert. We also bolted on their Shock Reservoir Mounts, Lighted License Plate Frame, and Quick Release Fire Extinguisher Mount with extinguisher.

Not enough suede? A suede wrapped Momo Steering Wheel just had to be added, not only matches the interior perfectly but provides a great gripping surface. We knew powered accessories were next in line, so we installed Outdoor Logic Switch Panels strategically throughout the interior dash, starting with the 2 Switch, 3 Switch, and Custom Dash 3 Switch Panels. Located in the center dash, the Lowrance 5M Baja GPS is accessible to both the passenger and driver, so either can easily navigate to their destinations and back.

Below the doors, we took faith in Vendetta Motorsports Rock Sliders to ensure proper protection and a safe place to step, all while maintaining a sleek, stylish look.

A pair of 3 Gallon Gas Roto PaX Containers were mounted with the LOX Pack Mount, and Extension clips. Be rest assured these 3 Gallon Gas containers will be ready to top off the tank during those long rides and stay in place no matter what terrain you are taking on.

With comfort and safety achieved in the passenger area, it was time to address the underside. We started with replacing the factory a-arms with some HCR Racing Factory Replacement A-Arms that extend the wheelbase by 1” for better high speed stability, as well as hill climbing and descents. These A-arm’s paired with a set of Walker Evans 2.5” Shocks and Assaults’ Bomber High Clearance Radius Rods, will provide a smooth ride and add the strength you can count on. To keep the underside protected from damage, we wrapped the axles with the Desert Molding Concepts Axle Wraps, covered the trailing arms with Factory UTV Trailing Arm Guards and protected the belly with a Factory UTV UHMW Skid Plate.

Last but not least, we had to give it a new pair of shoes, the GBC Motorsports Kanati Mongrel Tires mounted on Method Beadlock Wheels perfectly combine strength, traction, and an aggressive look. We had to keep the look consistent, so the spare setup is matched up on that spare tire mount just in case.

If you are looking to build a machine that is comfortable inside and out, this set up will do the trick.  This customer has it made in the shade with his upgraded ride! If you would like to see more check out our other custom builds in our projects tab!